BLOWER UNIT > INSTALLATION

for Preparation Click here



1. INSTALL BLOWER ASSEMBLY (w/o PTC Heater)

  1. Engage the guide.

  1. Install the blower assembly with the 3 screws.

  1. Connect the connector.



2. INSTALL BLOWER ASSEMBLY (w/ PTC Heater)

  1. Engage the guide.

  1. Install the blower assembly with the 3 screws.

  1. Connect the connector.

  1. Engage each clamp.

  1. Install the screw and connect the quick heater connector.

  1. Reattach the felt tape.



3. INSTALL AIR CONDITIONING UNIT ASSEMBLY
(Click here)