BLOWER UNIT > REMOVAL

for Preparation Click here



1. REMOVE AIR CONDITIONING UNIT ASSEMBLY
(Click here)


2. REMOVE BLOWER ASSEMBLY (w/o PTC Heater)

  1. Disconnect the connector and disengage each clamp.



  1. Disengage the 3 screws and guide, and remove the blower assembly.


    E220409



3. REMOVE BLOWER ASSEMBLY (w/ PTC Heater)

  1. Remove the felt tape to the extent that the screw can be removed.



    E220408

  1. Remove the screw and disconnect the quick heater connector.

  1. Disengage each clamp.

  1. Disconnect the connector.



  1. Disengage the 3 screws and guide, and remove the blower assembly.


    E220409