ELECTRICAL KEY OSCILLATOR (for Rear Floor) > INSTALLATION

for Preparation Click here



1. INSTALL NO. 3 ELECTRICAL KEY OSCILLATOR

  1. Engage the clamp and install the No. 3 electrical key oscillator.

    NOTICE:
    Be careful when installing the electrical key oscillator. If the oscillator is dropped, replace it with a new one.

  1. Connect the connector.



2. INSTALL REAR DECK FLOOR BOX

  1. Install the rear deck floor box.



3. INSTALL REAR NO. 2 FLOOR BOARD

  1. Install the rear No. 2 floor board.