ELECTRICAL KEY OSCILLATOR (for Rear Floor) > REMOVAL

for Preparation Click here



1. REMOVE REAR NO. 2 FLOOR BOARD

  1. Remove the rear No. 2 floor board.



2. REMOVE REAR DECK FLOOR BOX

  1. Remove the rear deck floor box.



3. REMOVE NO. 3 ELECTRICAL KEY OSCILLATOR


    B266776

  1. Disconnect the connector.

  1. Disengage the clamp and remove the No. 3 electrical key oscillator.

    NOTICE:
    Be careful when removing the electrical key oscillator. If the oscillator is dropped, replace it with a new one.