MILLIMETER WAVE RADAR SENSOR > INSTALLATION

for Preparation Click here



1. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY


    E214951E01

  1. Tighten the 3 bolts on the millimeter wave radar sensor assembly.

    Torque:
    5.5 N*m{ 56 kgf*cm , 49 in.*lbf }

    HINT:
    Tighten the bolts in the order indicated in the illustration.

  1. Connect the connector.



2. INSTALL FRONT BUMPER ASSEMBLY
(Click here)


3. ADJUST MILLIMETER WAVE RADAR SENSOR
(Click here)