WASHER NOZZLE (for Front Side) > ON-VEHICLE INSPECTION

for Preparation Click here

1. With the power switch on (READY), check the position that the washer fluid hits the windshield.
   

   Standard:

   Washer fluid hits the windshield in the areas shown in the illustration.
   

   
   
   
   
   
   
   

   Standard Clearance 

   Area	Measurement	Area	Measurement
   A	122.2 mm (4.811 in.)	B	462.9 mm (1.52 ft.)
   C	192.4 mm (7.575 in.)	D	36.8 mm (1.449 in.)

   
   

   Text in Illustration 

   *1	Upper Limit	*2	Standard
   *3	Lower Limit	-	-

   HINT:

   If the result is not as specified, replace the washer nozzle sub-assembly.