HEADLIGHT CLEANER ACTUATOR > INSTALLATION

for Preparation Click here



1. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY


    E220618E01

  1. Push the tab shown by allow (1) and engage the 2 claws as shown in the illustration.



    E220616

  1. Push up the headlight cleaner actuator clamp.



    E220614

  1. Install the headlight washer actuator sub-assembly with the headlight cleaner clamp as shown in the illustration.

    HINT:
    Use the same procedure for the RH side and LH side.

  1. Install the headlight cleaner hose.



2. INSTALL HEADLIGHT CLEANER WASHER NOZZLE


    E220637

  1. Engage the 2 claws to install the headlight cleaner washer nozzle.

    HINT:
    Use the same procedure for the RH side and LH side.



3. INSTALL FRONT BUMPER ASSEMBLY
(Click here)