DOOR CONTROL SWITCH > INSPECTION

for Preparation Click here



1. INSPECT DOOR CONTROL SWITCH ASSEMBLY


    B274464E02

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    4 (L) - 3 (E)
    		Locked
    		Below 1 Ω
    4 (L) - 3 (E)
    		off
    		10 kΩ or higher
    2 (UL) - 3 (E)
    		Unlocked
    		Below 1 Ω
    2 (UL) - 3 (E)
    		off
    		10 kΩ or higher

    Text in Illustration 
    *a
    		Component without harness connected
    (Door Control Switch Assembly)
    *b
    		Unlock
    *c
    		Lock
    If the result is not as specified, replace the door control switch assembly.