INNER REAR VIEW MIRROR > INSTALLATION

for Preparation Click here



1. INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/o EC Mirror)


    B175044

  1. Slide the inner rear view mirror assembly in the direction indicated by the arrow in the illustration to install it.

  1. Engage the 2 claws to the inner mirror base cover.



2. INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror)

  1. Using a T20 "TORX" socket wrench, install the inner rear view mirror assembly with the screw.

    Torque:
    1.5 N*m{ 15 kgf*cm , 13 in.*lbf }

  1. Connect the connector.



3. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror)


  1. w/o Rear View Monitor System:

    1. Engage the 6 claws to install the inner rear view mirror stay holder cover.



      2. B269075

    2. Engage the 2 guides to install the inner rear view mirror stay holder cover as shown in the illustration.



  1. w/ Rear View Monitor System:

    1. Engage the 2 claws to install the inner rear view mirror stay holder cover.



      2. B269078

    2. Engage the 2 guides to install the inner rear view mirror stay holder cover as shown in the illustration.