ULTRASONIC SENSOR (for Front Side) > INSTALLATION

for Preparation Click here



1. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER


    E220149E01

  1. Engage the 4 claws and install the No. 1 ultrasonic sensor retainer to the front bumper assembly.
    Text in Illustration 
    *a
    		Keyhole
    *b
    		Slit

    HINT:
    When installing the retainer, align the keyhole and slit as shown in the illustration.



2. INSTALL NO. 1 ULTRASONIC SENSOR

  1. Engage the 2 claws to install the No. 1 ultrasonic sensor to the No. 1 ultrasonic sensor retainer.

  1. Connect the connector.



3. INSTALL FRONT BUMPER ASSEMBLY
(Click here)