ULTRASONIC SENSOR (for Front Side) > REMOVAL

for Preparation Click here



1. REMOVE FRONT BUMPER ASSEMBLY
(Click here)


2. REMOVE NO. 1 ULTRASONIC SENSOR


    E221986

  1. Disconnect the connector.

    HINT:
    The illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.



    E221985

  1. Disengage the 2 claws and remove the No. 1 ultrasonic sensor.

    HINT:
    The illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.



3. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER


    E220136

  1. Disengage the 4 claws and remove the No. 1 ultrasonic sensor retainer from the front bumper assembly.