FRONT DOOR SPEAKER > INSTALLATION

for Preparation Click here



1. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY


    E221217E01

  1. Install the front No. 1 speaker assembly with the 4 bolts.

    NOTICE:
    Do not touch the speaker cone.

    HINT:
    Install the bolts in the order shown in the illustration.

  1. Connect the connector.



2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY (for Driver Side)


    B266095E01

  1. Connect the front door lock remote control cable assembly and front door inside locking cable assembly.
    Text in Illustration 
    *1
    		Front Door Inside Locking Cable Assembly
    *2
    		Front Door Lock Remote Control Cable Assembly

  1. w/ Seat Position Memory System:

    1. Connect the connector.



    B266092

  1. Engage the 11 clips and install the front door trim board sub-assembly.

  1. Install the 2 screws.

  1. Remove the protective tape.



3. INSTALL DOOR ARMREST COVER (for Driver Side)


    B266086

  1. Install the door armrest cover.



4. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)

  1. Connect the connector.



    B266083

  1. Engage the 2 guides, 3 clips and 7 claws, and install the power window regulator master switch assembly with front door armrest base panel.



5. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY (for Front Passenger Side)


    B266097E01

  1. Connect the front door lock remote control cable assembly and front door inside locking cable assembly.
    Text in Illustration 
    *1
    		Front Door Inside Locking Cable Assembly
    *2
    		Front Door Lock Remote Control Cable Assembly



    B266110

  1. Engage the 11 clips and install the front door trim board sub-assembly.

  1. Install the 3 screws.

  1. Remove the protective tape.



6. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)

  1. Connect the connector.



    B266103

  1. Engage the 4 guides, 3 clips and 8 claws, and install the power window regulator switch assembly with front door armrest base panel.



7. INSTALL DOOR ASSIST GRIP ASSEMBLY (for Front Passenger Side)


    B266100

  1. Engage the 3 guides and install the door assist grip assembly.

  1. Install the 2 screws.



8. INSTALL DOOR ASSIST GRIP COVER (for Front Passenger Side)


    B274554

  1. Engage the guide and 4 claws, and install a new door assist grip cover.



9. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH


    B266080

  1. Engage the clip and claws, and install the front door lower frame bracket garnish.



10. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG


    B266077

  1. Engage the 3 claws and install the front door inside handle bezel plug.