INSTRUMENT PANEL SPEAKER > INSTALLATION

for Preparation Click here



1. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY

  1. Connect the connector.



    E220077E01

  1. Install the front No. 2 speaker assembly with the 2 bolts.

    NOTICE:
    Do not touch the speaker cone.

    HINT:
    Install the bolts in the order shown in the illustration.



2. INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY (for LH Side)


    B269866

  1. Engage the 2 guides and 2 clips to install the No. 2 instrument panel speaker panel sub-assembly.



3. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY (for RH Side)

HINT:
Use the same procedure described for the LH side.



4. INSTALL FRONT NO. 4 SPEAKER ASSEMBLY (w/ Front Center Speaker)

  1. Connect the connector.



    E220082E01

  1. Install the front No. 4 speaker assembly with the 2 bolts.

    NOTICE:
    Do not touch the speaker cone.

    HINT:
    Install the bolts in the order shown in the illustration.



5. INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY (w/ Front Center Speaker)


    B269890

  1. Engage the 4 clips to install the No. 1 speaker opening cover assembly.