REAR DOOR SPEAKER > REMOVAL

for Preparation Click here



1. REMOVE REAR DOOR INSIDE HANDLE BEZEL PLUG


    B269470

  1. Using a moulding remover, disengage the 3 claws and remove the rear door inside handle bezel plug as shown in the illustration.



2. REMOVE REAR DOOR REAR FRAME BRACKET


    B269480

  1. Disengage the clip, 3 claws and 3 guides and remove the rear door rear frame bracket.



3. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL


    B269474

  1. Using a moulding remover, disengage the 3 clips, 4 claws and 2 guides as shown in the illustration.

  1. Disconnect the connector and remove the rear power window regulator switch assembly with rear door armrest base panel.



4. REMOVE REAR DOOR ARMREST COVER


    B269478

  1. Remove the rear door armrest cover.



5. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY


    B269482E01

  1. Put protective tape around the rear door panel.
    Text in Illustration 
    *1
    		Protective Tape



    B269484

  1. Remove the 2 screws.

  1. Using a clip remover, disengage the 9 clips.



    B269486

  1. Pull out the rear door trim board sub-assembly in the direction indicated by the arrow as shown in the illustration.

  1. Raise the rear door trim board sub-assembly to remove the rear door trim board sub-assembly together with the rear door inner glass weatherstrip.

  1. Disconnect the connector.



    B269490

  1. Disconnect the rear door lock remote control cable assembly and rear door inside locking cable assembly.

  1. Remove the rear door trim board clip (blue) from the rear door trim board.



6. REMOVE REAR DOOR INNER GLASS WEATHERSTRIP


    B269496E01

  1. Using a screwdriver, disengage the 3 claws and remove the rear door inner glass weatherstrip from the rear door trim board sub-assembly as shown in the illustration.
    Text in Illustration 
    *1
    		Screwdriver



7. REMOVE REAR SPEAKER ASSEMBLY


    E221218

  1. Disconnect the connector.

  1. Remove the 3 bolts and rear speaker assembly.

    NOTICE:
    Do not touch the speaker cone.