AMPLIFIER ANTENNA > INSTALLATION

for Preparation Click here



1. INSTALL AMPLIFIER ANTENNA ASSEMBLY (for Back Door)

  1. Connect the 2 connectors.

  1. Install the amplifier antenna assembly with the bolt.

    Torque:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf }



2. INSTALL BACK DOOR TRIM BOARD ASSEMBLY (for Back Door)


    B270188E01

  1. Engage the 13 clips to install the back door trim board assembly.

    HINT:
    Engage the clips in the order shown in the illustration.



    B270187

  1. Slide the handle plate of the back door trim board to engage it.



3. INSTALL BACK DOOR SIDE GARNISH LH (for Back Door)


    B270184

  1. Engage the 2 clips, 2 claws and guide to install the back door side garnish LH.



4. INSTALL BACK DOOR SIDE GARNISH RH (for Back Door)


    B270185

  1. Engage the 2 clips, 2 claws and guide to install the back door side garnish RH.



5. INSTALL UPPER BACK DOOR TRIM PANEL ASSEMBLY (for Back Door)


    B270183

  1. Engage the 4 clips and 4 claws to install the upper back door trim panel assembly.



6. INSTALL ROOF ANTENNA ASSEMBLY (for Roof Side)


    E201025E01

  1. Engage the 2 claws.

  1. Place the antenna cord in the cutout of the antenna nut.
    Text in Illustration 
    *1
    		Cutout

  1. Install the roof antenna assembly with the antenna nut.

    Torque:
    4.5 N*m{ 46 kgf*cm , 40 in.*lbf }

  1. Connect the connector.



7. INSTALL ROOF HEADLINING ASSEMBLY (for Roof Side)
(Click here)


8. INSTALL ROOF ANTENNA POLE SUB-ASSEMBLY (for Roof Side)
w/ Audio: (Click here)
w/o Audio: (Click here)