OUTER REAR VIEW MIRROR GLASS > REMOVAL

for Preparation Click here



1. REMOVE OUTER MIRROR

  1. Push the upper part of the mirror surface and tilt it.



    B270694E01

  1. Apply protective tape to the areas shown in the illustration.
    Text in Illustration 
    *1
    		Protective Tape
    *2
    		Moulding Remover

  1. Using a moulding remover, disengage the 2 claws at the lower part of the outer rear view mirror.

  1. Push the lower part of the mirror surface and tilt it.



    B270696E01

  1. Apply protective tape to the areas shown in the illustration.
    Text in Illustration 
    *1
    		Protective Tape
    *2
    		Moulding Remover

  1. Using a moulding remover disengage the 2 claws at the upper part of the outer rear view mirror, and separate the outer mirror.



  1. w/o EC Mirror:



      B270747

    1. Disconnect the 2 connectors and remove the outer mirror.



  1. w/ EC Mirror:



      B270698

    1. Disconnect the 3 connectors and remove the outer mirror.