ENGINE HOOD COURTESY SWITCH > REMOVAL

for Preparation Click here



1. REMOVE FRONT BUMPER ASSEMBLY
(Click here)


2. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)


    E214950

  1. Disconnect the connector.



    E214951

  1. Remove the 3 bolts and the millimeter wave radar sensor assembly.



3. REMOVE SECURITY COURTESY SWITCH (HOOD LOCK ASSEMBLY)


    B270209E01

  1. Using a screwdriver, remove the hood lock nut cap.
    Text in Illustration 
    *1
    		Protective Tape

    HINT:
    Tape the screwdriver tip before use.



    B270212E01

  1. Disconnect the connector.
    Text in Illustration 
    *1
    		Hood Lock Bolt

  1. Disengage the clamp.

  1. Remove the 2 bolts and hood lock bolt.



  1. for LHD:



      B270213

    1. Disconnect the hood lock control cable and remove the hood lock assembly.



  1. For RHD:



      B270214

    1. Disconnect the hood lock control cable and remove the hood lock assembly.