CLOCK SYSTEM > PROBLEM SYMPTOMS TABLE

for Preparation Click here


HINT:
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.


Clock 
Symptom
Suspected Area
See page
Clock does not operate at all.
Fuse (ECU-ACC, ECU-B, A/C)
-
Wire Harness or connector
-
Center cluster module circuit
Click here
Clock display illumination malfunction
Wire Harness or connector
-
Combination meter assembly
Click here
Center cluster module circuit
Click here
Clock loses or gains time.
Center cluster module circuit
Click here
Clock cannot be adjusted.
AVC-LAN circuit (w/ Navigation System (for HDD))
Click here
AVC-LAN circuit (w/ Navigation System (for DVD))
Click here
Display and navigation module display (w/ Navigation System (for DVD))
Click here
Navigation computer sub-assembly (w/ Navigation System (for HDD))
Click here
Center cluster module circuit
Click here