BATTERY > INSTALLATION

for Preparation Click here



1. INSTALL AUXILIARY BATTERY

  1. Install the battery.

  1. Install the battery clamp with the nut.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

  1. Connect the positive (+) battery terminal with the nut.

  1. Install the battery terminal cover.



2. INSTALL BATTERY HOSE

  1. Connect the battery hose.

    HINT:
    Push in the battery hose to the battery until a click sound is heard.



3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



4. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE

  1. Engage the 4 claws and 2 guides to install the rear floor board upper No. 3 plate.



5. INSTALL DECK FLOOR BOX RH

  1. Engage the 6 guides.

  1. Install the deck floor box RH with the clip.



6. INSTALL REAR NO. 3 FLOOR BOARD

  1. Install the rear No. 3 floor board.



7. INSTALL REAR DECK FLOOR BOX

  1. Install the rear deck floor box.



8. INSTALL REAR NO. 2 FLOOR BOARD

  1. Install the rear No. 2 floor board.