ROCKER PANEL MOULDING > REASSEMBLY

for Preparation Click here



1. INSTALL NO. 6 ROCKER PANEL MOULDING PROTECTOR


  1. for Front Side:

    1. Wipe off any tape adhesive residue with cleaner.



      2. B270398

    2. Install a new No. 6 rocker panel moulding protector as shown in the illustration.

      HINT:
      Attach the new No. 6 rocker panel moulding protector to the line marked on the rocker panel moulding.



  1. for Rear Side:

    1. Wipe off any tape adhesive residue with cleaner.



      2. B270399

    2. Install a new No. 6 rocker panel moulding protector as shown in the illustration.

      HINT:
      Attach the new No. 6 rocker panel moulding protector to the line marked on the rocker panel moulding.