DTC    01-E0    Registration Complete Indication Error

DTC    01-E3    Registration Demand Transmission

DTC    01-E4    Multiple Frame Incomplete

for Preparation Click here


DESCRIPTION


DTC No.
DTC Detection Condition
Trouble Area
01-E0
"Registration complete" signal from the master device cannot be received.
-
01-E3
Either condition is met:
  1. The registration demand signal from the slave device is output.
  2. The registration demand signal is output by receiving connection confirmation signal from the sub-master device.
-
01-E4
The multiple frame transmission is incomplete.
-

HINT:
Even if no fault is present, these DTCs may be stored depending on the auxiliary battery condition or engine start voltage.


INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs. These DTCs do not indicate a malfunction.