FOOTWELL LIGHT > INSPECTION

for Preparation Click here



1. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH


    E151728E17

  1. Connect a positive (+) lead from the auxiliary battery to terminal 2 (B) and a negative (-) lead to terminal 1 (L).

  1. Check that the No. 1 interior illumination light comes on.

    OK:
    No. 1 interior illumination light comes on.

    Text in Illustration 
    *a
    		Component without harness connected
    (No. 1 Interior Illumination Light Assembly LH)
    If the result is not as specified, replace the No. 1 interior illumination light assembly LH.



2. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY RH


    E151728E17

  1. Connect a positive (+) lead from the auxiliary battery to terminal 2 (B) and a negative (-) lead to terminal 1 (L).

  1. Check that the No. 1 interior illumination light comes on.

    OK:
    No. 1 interior illumination light comes on.

    Text in Illustration 
    *a
    		Component without harness connected
    (No. 1 Interior Illumination Light Assembly RH)
    If the result is not as specified, replace the No. 1 interior illumination light assembly RH.