DTC    63-41    Wrong Disc

DTC    63-42    Disc cannot be Read

for Preparation Click here


DESCRIPTION


DTC No.
DTC Detection Condition
Trouble Area
63-41
An unsuitable disc is inserted.
  1. CD
  2. Radio receiver assembly
63-42
The disc cannot be read.

INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs.

1.CHECK DISC


    I100152

  1. Check that the disc is not deformed or cracked.

    OK:
    No deformation or cracks on the disc



NG
CHANGE DISC
OK


2.DISC CLEANING


    I100151

  1. Disc cleaning

    1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

      NOTICE:
      Do not use a conventional record cleaner or anti-static preservative.


NEXT


3.CLEAR DTC

  1. Clear the DTCs (Click here).


NEXT


4.RECHECK FOR DTC

  1. Recheck for DTCs and check if the same DTC is output again.

    OK:
    No DTCs are output.



NG
Go to step 5
OK

END 

5.REPLACE DISC AND RECHECK

  1. Replace the disc and recheck.

    1. Replace the disc with a known good one.

    2. Clear the DTCs (Click here).

    3. Recheck for DTCs and check if the same DTC is output again.

      OK:
      No DTCs are output.



NG
REPLACE RADIO RECEIVER ASSEMBLY (Click here)
OK

END