DTC    63-46    Scratched / Reversed Disc

for Preparation Click here


DESCRIPTION


DTC No.
DTC Detection Condition
Trouble Area
63-46
Scratches or dirt is found on CD surface or CD is inserted upside down.
  1. CD
  2. Radio receiver assembly

INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs.

1.CHECK THAT CD IS INSERTED PROPERLY

  1. Check whether or not the CD is inserted upside down.

    OK:
    CD is properly inserted.



NG
REPLACE CD AND RECHECK
OK


2.CHECK DISC


    I100152

  1. Check that the disc is not deformed or cracked.

    OK:
    No deformation or cracks on the disc



NG
CHANGE DISC
OK


3.DISC CLEANING


    I100151

  1. Disc cleaning

    1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

      NOTICE:
      Do not use a conventional record cleaner or anti-static preservative.


NEXT


4.CLEAR DTC

  1. Clear the DTCs (Click here).


NEXT


5.RECHECK FOR DTC

  1. Recheck for DTCs and check if the same DTC is output again.

    OK:
    No DTCs are output.



NG
Go to step 6
OK

END 

6.REPLACE CD AND RECHECK

  1. Replace the disc and recheck.

    1. Replace the disc with a known good one.

    2. Clear the DTCs (Click here).

    3. Recheck for DTCs and check if the same DTC is output again.

      OK:
      No DTCs are output.



NG
REPLACE RADIO RECEIVER ASSEMBLY (Click here)
OK

END