DTC    63-78    DSP Error

for Preparation Click here


DESCRIPTION


DTC No.
DTC Detection Condition
Trouble Area
63-78
An error occurs during the decode process (MP3/WMA).
-

INSPECTION PROCEDURE

NOTICE:
  1. This DTC may be output even if there is no malfunction.
  2. If this DTC is detected frequently, replace the radio receiver assembly.

HINT:
After the inspection is completed, clear the DTCs.

1.CLEAR DTC

  1. Clear the DTCs (Click here).


NEXT


2.RECHECK FOR DTC

  1. Recheck for DTCs and check if the same DTC is output again.

    OK:
    No DTCs are output.



NG
REPLACE RADIO RECEIVER ASSEMBLY (Click here)
OK

END