WINDOW GLASS ANTENNA WIRE > ON-VEHICLE INSPECTION

for Preparation Click here

1. Check for continuity of the antenna.
   

   Text in Illustration 

   *1	Tester Probe
   *2	Antenna Wire
   *3	Tin Foil

   HINT:

   Check for continuity at the center of each antenna wire as shown in the illustration.

   NOTICE:

   1. When cleaning the glass, wipe it in the direction of the wire with a soft dry cloth. Take care not to damage the wire. Do not use detergents or glass cleaners with abrasive ingredients.
      
   2. When measuring resistance, wrap a piece of tin foil around the tip of the negative probe and press the foil against the wire with your finger, as shown in the illustration.
      

   OK:

   There is continuity in the antenna.
   

   If the result is not as specified, repair the window glass antenna wire.