PARKING BRAKE PEDAL (for RHD) > REASSEMBLY

for Preparation Click here



1. INSTALL PARKING PEDAL PAD

  1. Install the parking pedal pad to the parking brake pedal assembly.



2. INSTALL PARKING BRAKE SWITCH ASSEMBLY


    C232714

  1. Install the parking brake switch assembly to the parking brake control pedal assembly with the screw.

    Torque:
    3.2 N*m{ 33 kgf*cm , 28 in.*lbf }



3. INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY

  1. Pass the No. 1 parking brake cable assembly through the parking brake pedal assembly.



    C232708

  1. Install the clip to the No. 1 parking brake cable assembly.



    C232710

  1. Bend the parking brake pedal claw.



    C232706

  1. Temporarily install the adjusting nut.