OIL PUMP > REASSEMBLY

for Preparation Click here



1. INSTALL OIL PUMP COVER SUB-ASSEMBLY


    A153830E03

  1. Coat the oil pump drive and driven rotors with engine oil, and place them into the oil pump with the marks facing the oil pump cover side.
    Text in Illustration 
    *1
    		Mark



    A216970

  1. Install the oil pump cover with the 5 bolts.

    Torque:
    8.8 N*m{ 90 kgf*cm , 78 in.*lbf }



2. INSTALL OIL PUMP RELIEF VALVE


    A216969E01

  1. Coat the relief valve with engine oil.
    Text in Illustration 
    *1
    		Plug
    *2
    		Valve Spring
    *3
    		Relief Valve

  1. Insert the relief valve and valve spring into the pump body hole.

  1. Using a 27 mm socket wrench, install the plug.

    Torque:
    49 N*m{ 500 kgf*cm , 37 ft.*lbf }