WIRELESS DOOR LOCK CONTROL SYSTEM > DATA LIST / ACTIVE TEST

for Preparation Click here



DATA LIST

HINT:
Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the power switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Main Body / Data List.

  5. Read the Data List according to the display on the intelligent tester.

    Main Body (Main Body ECU (Multiplex Network Body ECU)) 
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    FR Door Lock Pos
    		Front door RH unlock detection switch signal/LOCK or UNLOCK
    		LOCK: Front door RH locked
    UNLOCK: Front door RH unlocked
    		-
    FL Door Lock Pos
    		Front door LH unlock detection switch signal/LOCK or UNLOCK
    		LOCK: Front door LH locked
    UNLOCK: Front door LH unlocked
    		-
    RR-Door Lock Pos SW
    		Rear door RH unlock detection switch signal/ON or OFF
    		ON: Rear door RH unlocked
    OFF: Rear door RH locked
    		-
    RL-Door Lock Pos SW
    		Rear door LH unlock detection switch signal/ON or OFF
    		ON: Rear door LH unlocked
    OFF: Rear door LH locked
    		-
    Wireless Control
    		Wireless door lock control function/ON or OFF
    		ON: Operates
    OFF: Does not operate
    		-
    Hazard Answer Back
    		Hazard answer-back of wireless/ON or OFF
    		ON: Operates
    OFF: Does not operate
    		-
    Wireless Auto Lock
    		Automatic lock function/ON or OFF
    		ON: Operates
    OFF: Does not operate
    		-
    Open Door Warning
    		Open door warning/ON or OFF
    		ON: Operates
    OFF: Does not operate
    		-
    Unlock 2 Operation
    		2 times operation of wireless unlock/ON or OFF
    		ON: All doors unlock when unlock switch pressed twice
    OFF: All doors unlock when unlock switch pressed once
    		-
    Panic Function
    		Panic function/ON or OFF
    		ON: Operates
    OFF: Does not operate
    		-
    Auto Lock Time
    		Automatic lock time/120 s, 60 s or 30 s
    		120 s: 120 seconds
    60 s: 60 seconds
    30 s: 30 seconds
    		-
    Keyless Entry Buzzer*1
    		Buzzer answer-back of wireless/ON or OFF
    		ON: Operates
    OFF: Does not operate
    		-
    P/W Wireless Ope Buzz
    		Buzzer sounds of wireless power window/ON or OFF
    		ON: Operates
    OFF: Does not operate
    		-
    Wireless Buzzer Vol
    		Wireless door lock buzzer volume/Level7, Level6, Level5, Level4, Level3, Level2, Level1 or Level0
    		Level7: Wireless buzzer volume level 7
    Level6: Wireless buzzer volume level 6
    Level5: Wireless buzzer volume level 5
    Level4: Wireless buzzer volume level 4
    Level3: Wireless buzzer volume level 3
    Level2: Wireless buzzer volume level 2
    Level1: Wireless buzzer volume level 1
    Level0: Wireless buzzer volume level 0
    		-
    *1: except Europe


ACTIVE TEST

HINT:
Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing the Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the power switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Main Body / Active Test.

  5. Perform the Active Test according to the display on the intelligent tester.

    Main Body (Main Body ECU (Multiplex Network Body ECU)) 
    Tester Display
    		Test Part
    		Control Range
    		Diagnostic Note
    Hazard
    		Turn signal flasher relay
    		ON/OFF
    		Observe headlights and rear combination lights for correct operation
    Illuminated Entry System
    		Interior lights (Interior light switch is in door position and all doors are closed)
    		ON/OFF
    		-
    Wireless Buzzer
    		Wireless door lock buzzer
    		ON/OFF
    		-