BLOWER UNIT > DISASSEMBLY

for Preparation Click here



1. REMOVE NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY


    E189134

  1. Remove the 2 screws and No. 1 blower damper servo sub-assembly.



2. REMOVE AIR FILTER CASE


    E189136

  1. Disengage the claw and guide, and remove the air filter case as shown in the illustration.



3. REMOVE AIR REFINER ELEMENT


    E189138

  1. Remove the air refiner element as shown in the illustration.



4. REMOVE FRONT BLOWER MOTOR SUB-ASSEMBLY


    E223543

  1. Remove the 3 screws and front blower motor sub-assembly.

    NOTICE:
    Do not reuse the front blower motor sub-assembly if it has been damaged or received an impact.