BLOWER UNIT > REASSEMBLY

for Preparation Click here



1. INSTALL FRONT BLOWER MOTOR SUB-ASSEMBLY


    E223543

  1. Install the front blower motor sub-assembly with the 3 screws.

    NOTICE:
    Do not reuse the front blower motor sub-assembly if it has been damaged or received an impact.



2. INSTALL AIR REFINER ELEMENT


    E189139

  1. Install the air refiner element as shown in the illustration.



3. INSTALL AIR FILTER CASE


    E189137

  1. Engage the guide and claw to install the air filter case as shown in the illustration.



4. INSTALL NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY


    E189134

  1. Install the No. 1 blower damper servo sub-assembly with the 2 screws.