P410 HYBRID TRANSMISSION / TRANSAXLE > SERVICE DATA |
| Transaxle fluid pressure | Engine Speed: 1000 rpm | 3 kPa (0.03 kgf/cm2, 0.4 psi) or more |
| Input shaft type T oil seal | 1.0 to 1.8 mm (0.0394 to 0.0709 in.) | |
| Hybrid vehicle transaxle assembly type T oil seal | LH side | -0.5 to 0.5 mm (-0.0197 to 0.0197 in.) |
| RH side | -0.5 to 0.5 mm (-0.0197 to 0.0197 in.) | |
| Shift control actuator seal | 8.5 to 9.8 mm (0.335 to 0.386 in.) | |
