METER / GAUGE SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



CHECK DTC

  1. Connect the intelligent tester to the DLC3.

  2. Turn the power switch on (IG) and turn the intelligent tester on.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / DTC.

  5. Check for DTCs.


CLEAR DTC

  1. Connect the intelligent tester to the DLC3.

  2. Turn the power switch on (IG) and turn the intelligent tester on.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / DTC.

  5. Clear the DTCs.