POWER WINDOW MASTER SWITCH > REMOVAL

for Preparation Click here



1. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL


    B266082

  1. Using a moulding remover, disengage the 3 clips, 7 claws and 2 guides as shown in the illustration.

  1. Disconnect the connector and remove the power window regulator master switch assembly with front door armrest base panel.



2. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY


    B268127

  1. Remove the 3 screws and multiplex network master switch assembly.