FRONT PASSENGER SIDE POWER WINDOW SWITCH > REMOVAL

for Preparation Click here



1. REMOVE DOOR ASSIST GRIP COVER


    B266098

  1. Using a moulding remover, disengage the 4 claws and guide, and remove the door assist grip cover.



2. REMOVE DOOR ASSIST GRIP ASSEMBLY


    B266100

  1. Remove the 2 screws.

  1. Disengage the 3 guides and remove the door assist grip assembly.



3. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL


    B266102

  1. Using a moulding remover, disengage the 3 clips, 8 claws and 4 guides as shown in the illustration.

  1. Disconnect each connector and remove the power window regulator switch assembly with front door armrest base panel.



4. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY


    B268846

  1. Disengage the 2 claws and remove the power window regulator switch assembly.