ENTRY AND START SYSTEM (for Entry Function) > DTC CHECK / CLEAR

for Preparation Click here



CHECK FOR DTC

HINT:
When using the intelligent tester with the power switch off to troubleshoot:
Connect the intelligent tester to the DLC3 and turn a courtesy light switch on and off at 1.5-second intervals until communication between the intelligent tester and vehicle begins.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the power switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body /Entry&Start / DTC.

  5. Check the details of the DTC(s) (Click here).


CLEAR DTC

HINT:
When using the intelligent tester with the power switch off to troubleshoot:
Connect the intelligent tester to the DLC3 and turn a courtesy light switch on and off at 1.5-second intervals until communication between the intelligent tester and vehicle begins.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the power switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Entry&Start / DTC / Clear.

  5. Press the YES button.

  6. Clear the DTCs.