PERFORMANCE DAMPER > INSTALLATION

for Preparation Click here



1. INSTALL SUSPENSION TOWER DAMPER


    C232232E02

  1. Install the suspension tower damper with the 2 nuts.
    Text in Illustration 
    *1
    		Label
    *a
    		LH Side
    *b
    		RH Side

    Torque:
    35 N*m{ 357 kgf*cm , 26 ft.*lbf }

    HINT:
    Make sure to install the suspension tower damper with the label facing upright.



2. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY (for LHD)

  1. Install the outer cowl top panel sub-assembly with the 9 bolts.

    Torque:
    12 N*m{ 122 kgf*cm , 9 ft.*lbf }

  1. w/ Wiper Deicer:
    Engage the 3 clamps to install the wire harness.

  1. Engage the clamp to install the wire harness.



3. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY (for RHD)

  1. Install the outer cowl top panel sub-assembly with the 9 bolts.

    Torque:
    12 N*m{ 122 kgf*cm , 9 ft.*lbf }

  1. w/ Wiper Deicer:
    Engage the 3 clamps to install the wire harness.

  1. Engage the clamp to install the wire harness.



4. INSTALL COWL BODY MOUNTING REINFORCEMENT LH (for LHD)

  1. Install the cowl body mounting reinforcement LH with the 2 bolts.

    Torque:
    12 N*m{ 122 kgf*cm , 9 ft.*lbf }



5. INSTALL COWL BODY MOUNTING REINFORCEMENT RH (for RHD)

  1. Install the cowl body mounting reinforcement RH with the 2 bolts.

    Torque:
    12 N*m{ 122 kgf*cm , 9 ft.*lbf }



6. INSTALL NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL (for LHD)

  1. Engage the claw and guide to install the No. 2 heater air duct splash shield seal.



7. INSTALL NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL (for RHD)

  1. Engage the claw and guide to install the No. 2 heater air duct splash shield seal.



8. INSTALL NO. 1 HEATER AIR DUCT SPLASH SHIELD SEAL (for LHD)

  1. Engage the 2 claws to install the No. 1 heater air duct splash shield seal.



9. INSTALL NO. 1 HEATER AIR DUCT SPLASH SHIELD SEAL (for RHD)

  1. Engage the 2 claws to install the No. 1 heater air duct splash shield seal.



10. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
(Click here)