REAR SEAT ASSEMBLY > DISASSEMBLY

for Preparation Click here



1. REMOVE BENCH TYPE REAR SEAT CUSHION COVER


    B270661

  1. Remove the 21 hog rings.



    B270663

  1. Remove the 22 hog rings.



  1. Remove the 24 hog rings and remove the bench type rear seat cushion cover.


    B270665



2. REMOVE REAR SEATBACK LOCK STRIKER COVER RH


    B270623

  1. Disengage the 2 guides and claw, and remove the rear seatback lock striker cover RH.



3. REMOVE REAR SEATBACK LOCK CONTROL LEVER BASE RH


    B270624

  1. Remove the screw.

  1. Disengage the 5 claws and remove the rear seatback lock control lever base RH.



4. REMOVE SEAT BELT ANCHOR COVER CAP


    B270625

  1. Disengage the 2 claws and remove the seat belt anchor cover cap.



5. REMOVE REAR SEAT SHOULDER BELT COVER


    B270626

  1. Disengage the 4 claws and remove the rear seat shoulder belt cover.



6. REMOVE REAR SEATBACK COVER RH


    B270627

  1. Disengage the 4 claws and remove the rear seatback cover RH.

  1. w/ Rear Seatback Cover:

    1. Remove the rear seatback cover RH.

      HINT:
      Use the same procedure for the RH side and LH side.



7. REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD RH


    B270628

  1. Using a clip remover, remove the 3 clips.

    NOTICE:
    The clips must not be reused.



    B270629

  1. Using a clip remover, disengage the 9 clips.

    NOTICE:
    The clips must not be reused.

  1. Remove the 9 clips from the separate type rear seatback cover RH.

    NOTICE:
    The clips must not be reused.



    B270631

  1. Disengage the 10 hooks.



    B270632

  1. Disengage the 4 hooks.



    B270633E01

  1. Detach the 6 pieces of double-sided tape.
    Text in Illustration 
    *1
    		Double-sided Tape



    B270636

  1. Disengage the 4 claws and remove the 2 rear seat headrest supports.



    B270634

  1. Disengage the 4 claws and remove the 2 rear seat center headrest supports.

  1. Remove the separate type rear seatback cover with pad RH from the rear seatback frame sub-assembly RH.



8. REMOVE SEPARATE TYPE REAR SEATBACK COVER RH


    B275406

  1. Disengage the 2 hooks.



    B275405

  1. Remove the 9 hog rings and separate type rear seatback cover RH.



9. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY RH


    B270639

  1. Remove the 2 screws.

  1. Disengage the guide.



  1. Pull out the rod of the rear seatback lock assembly as shown in the illustration, and then remove the rear seat lock control lever RH


    B271739



10. REMOVE REAR SEATBACK EDGE PROTECTOR


    B270637E01

  1. Detach the 6 pieces of double-sided tape and remove the rear seatback edge protector.
    Text in Illustration 
    *1
    		Double-sided Tape



11. REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY


    B265194

  1. Remove the nut and rear center seat outer belt assembly.



12. REMOVE REAR SEATBACK LOCK ASSEMBLY RH


    B270641

  1. Remove the 2 bolts and the rear seatback lock assembly RH.



13. REMOVE REAR SEATBACK LOCK STRIKER COVER LH


    B270643

  1. Disengage the 2 guides and claw, remove the rear seatback lock striker cover LH.



14. REMOVE REAR SEATBACK LOCK CONTROL LEVER BASE LH


    B270644

  1. remove the screw.

  1. Disengage the 5 claws and remove the rear seatback lock control lever base LH.



15. REMOVE REAR SEATBACK COVER LH


    B270642

  1. Disengage the 4 claws and remove the rear seatback cover LH.



16. REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD LH


    B270645

  1. Using a clip remover, remove the 2 clips.

    NOTICE:
    The clips must not be reused.



    B270646E01

  1. Disengage the fastener.
    Text in Illustration 
    *1
    		Fastener

  1. Using a clip remover, disengage the 9 clips.

    NOTICE:
    The clips must not be reused.

  1. Remove the 9 clips from the separate type rear seatback cover LH.

    NOTICE:
    The clips must not be reused.



    B270647

  1. Disengage the 8 hooks.



    B271742

  1. Disengage the 2 hooks.



    B270648E01

  1. Detach the 6 pieces of double-sided tape.
    Text in Illustration 
    *1
    		Double-sided Tape



    B270649

  1. Disengage the 4 claws and remove the 2 rear seat headrest supports.

  1. Remove the separate type rear seatback cover with pad from the rear seatback frame sub-assembly LH.



17. REMOVE SEPARATE TYPE REAR SEATBACK COVER LH


    B270659

  1. Remove the 11 hog rings and the separate type rear seatback cover LH.



18. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH


    B270650

  1. Remove the 2 screws.

  1. Disengage the guide.



  1. Pull out the rod of the rear seatback lock assembly as shown in the illustration, and then remove the rear seat lock control lever LH


    B271743



19. REMOVE NO. 2 REAR SEATBACK EDGE PROTECTOR


    B270654E01

  1. Detach the 4 pieces of double-sided tape and remove the No. 2 rear seatback edge protector.
    Text in Illustration 
    *1
    		Double-sided Tape



20. REMOVE REAR SEATBACK LOCK ASSEMBLY LH


    B270656

  1. Remove the 2 bolts and the rear seatback lock assembly LH.