REAR SPOILER > REMOVAL

for Preparation Click here



1. REMOVE UPPER BACK DOOR TRIM PANEL ASSEMBLY


    B270183

  1. Using a moulding remover, disengage the 4 clips and 4 claws, and remove the upper back door trim panel assembly.



2. REMOVE REAR SPOILER SUB-ASSEMBLY


    B270346

  1. Remove the 2 hole plugs and 2 screws.

  1. Remove the 2 nuts.

  1. Disconnect the connector.



    B270347E01

  1. Put protective tape around the rear spoiler sub-assembly.
    Text in Illustration 
    *1
    		Protective Tape

  1. Disengage the 4 clips and remove the rear spoiler sub-assembly.



  1. Remove the 4 clips as shown in the illustration.


    B270352