SIDE TURN SIGNAL LIGHT ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH


    E221729E01

  1. Connect a positive (+) lead from the auxiliary battery to terminal 1 and a negative (-) lead to terminal 2.

  1. Check that the side turn signal light comes on.

    OK:
    The light comes on.

    Text in Illustration 
    *a
    		Component without harness connected
    (Side Turn Signal Light Assembly LH)
    If the result is not as specified, replace the side turn signal light assembly LH.



2. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY RH


    E221729E01

  1. Connect a positive (+) lead from the auxiliary battery to terminal 1 and a negative (-) lead to terminal 2.

  1. Check that the side turn signal light comes on.

    OK:
    The light comes on.

    Text in Illustration 
    *a
    		Component without harness connected
    (Side Turn Signal Light Assembly RH)
    If the result is not as specified, replace the side turn signal light assembly RH.