OCCUPANT DETECTION SENSOR > INSPECTION

for Preparation Click here



1. INSPECT OCCUPANT DETECTION SENSOR (SEPARATE TYPE FRONT SEAT CUSHION PAD)


    B218574E01

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    1 - 3
    		Front passenger seat occupied
    		Below 100 Ω
    1 - 3
    		Front passenger seat not occupied
    		1 MΩ or higher

    Text in Illustration 
    *a
    		Component without harness connected
    (Occupant Detection Sensor (Separate Type Front Seat Cushion Pad))
    If the result is not as specified, replace the occupant detection sensor (separate type front seat cushion pad).