LIN COMMUNICATION SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



CHECK DTC

  1. Connect the intelligent tester to the DLC3.

  2. Turn the power switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Power Source Control, Entry&Start or Main Body / DTC.

  5. Check the details of the DTC(s) (Click here).


CLEAR DTC

  1. Connect the intelligent tester to the DLC3.

  2. Turn the power switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Power Source Control, Entry&Start or Main Body / DTC / Clear.

  5. Press the YES button.

  6. Clear the DTC(s).