BACK DOOR OPENER SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL BACK DOOR OPENER SWITCH ASSEMBLY

  1. Install the back door opener switch assembly with the 2 bolts.

  1. Connect the connector.



2. INSTALL BACK DOOR TRIM BOARD ASSEMBLY


    B270188E01

  1. Engage the 13 clips to install the back door trim board assembly.

    HINT:
    Engage the clips in the order shown in the illustration.



    B270187

  1. Slide the handle plate of the back door trim board to engage it.



3. INSTALL BACK DOOR SIDE GARNISH LH


    B270184

  1. Engage the 2 clips, 2 claws and guide to install the back door side garnish LH.



4. INSTALL BACK DOOR SIDE GARNISH RH


    B270185

  1. Engage the 2 clips, 2 claws and guide to install the back door side garnish RH.



5. INSTALL UPPER BACK DOOR TRIM PANEL ASSEMBLY


    B270183

  1. Engage the 4 clips and 4 claws to install the upper back door trim panel assembly.