REAR WIPER MOTOR > INSPECTION

for Preparation Click here



1. INSPECT REAR WIPER MOTOR ASSEMBLY


    E169055E07

  1. Check the wiper intermittent operation.

    1. Connect an auxiliary battery positive (+) lead to terminal 4 (+B), and a negative (-) lead to terminal 2 (C1) and terminal 5 (E), and check that the motor operates.

      OK:
      Motor operates.

      Text in Illustration 
      *a
      		Component without harness connected
      (Rear Wiper Motor Assembly)
      If the result is not as specified, replace the rear wiper motor assembly.



    E169055E09

  1. Check the wiper continuous operation.

    1. Connect an auxiliary battery positive (+) lead to terminal 4 (+B), and a negative (-) lead to terminal 3 (WU) and terminal 5 (E), and check that the motor operates.

      OK:
      Motor operates.

      Text in Illustration 
      *a
      		Component without harness connected
      (Rear Wiper Motor Assembly)
      If the result is not as specified, replace the rear wiper motor assembly.