WIRELESS DOOR LOCK BUZZER > INSPECTION

for Preparation Click here



1. INSPECT WIRELESS DOOR LOCK BUZZER


    B144393E19

  1. Measure the resistance according to the value(s) in the table below.
    Text in Illustration 
    *a
    		Component without harness connector
    (Wireless Door Lock Buzzer)

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    1 - 2
    		Always
    		950 to 1050 Ω

    If the result is not as specified, replace the wireless door lock buzzer.