POWER MIRROR CONTROL SYSTEM (w/o Memory) > SYSTEM DESCRIPTION

for Preparation Click here



FUNCTION OF MAIN COMPONENT

Component
Function
Vertical mirror motor
Moves the mirror surface vertically in accordance with the vertical mirror motor outer mirror switch assembly operation.
Horizontal mirror motor
Moves the mirror surface horizontally in accordance with the horizontal mirror motor outer mirror switch assembly operation.
Mirror heater
When the mirror heater switch on the center cluster module circuit (air conditioner control assembly) is operated, the A/C amplifier detects the switch operation via LIN communication. The A/C amplifier operates the no. 1 integration relay and mirror heater in accordance with the switch operation.
Mirror select switch
Consists of R and L switches. One must be chosen to operate the outer mirror switch assembly.
Mirror adjust switch
After selecting the R or L switch, the right, left, up and down control switches can be operated to change the angle of the mirror.

SYSTEM OPERATION

  1. The remote control mirror has the following features:

    Function
    		Outline
    Electrical remote control mirror function
    		When the outer mirror switch assembly is operated, this function moves the mirror surface vertically or horizontally to enable the driver to attain an optimal mirror angle. Setting the mirror select switch to the R position operates the right mirror, and setting it to the L position operates the left mirror.
    Mirror heater function
    		Turns on the mirror heaters when the rear window defogger is turned on. The rear window defogger and mirror heaters automatically turn off after 15 min.