IGNITION COIL AND SPARK PLUG > INSTALLATION

for Preparation Click here



1. INSTALL SPARK PLUG

  1. Using a 14 mm spark plug wrench, install the 4 spark plugs.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }



2. INSTALL IGNITION COIL ASSEMBLY

  1. Install the 4 ignition coils with the 4 bolts.

    Torque:
    10 N*m{ 102 kgf*cm , 7 ft.*lbf }

    NOTICE:
    When installing each ignition coil, do not damage the plug cap on the engine head cover opening or the upper edge of the spark plug tube.

  1. Connect the 4 ignition coil connectors.



3. INSTALL NO. 2 CYLINDER HEAD COVER


    A248095

  1. Engage the 3 clips to install the cover.

    NOTICE:
    1. Be sure to engage the clips securely.
    2. Do not apply excessive force or hit the cover to engage the clips. This may cause the cover to break.