HEATED OXYGEN SENSOR > REMOVAL

for Preparation Click here



1. REMOVE FRONT NO. 3 ENGINE UNDER COVER


    A212293

  1. Remove the 4 clips and front No. 3 engine under cover.



2. REMOVE HEATED OXYGEN SENSOR


    A212294

  1. Disconnect the heated oxygen sensor connector.

  1. Remove the wire harness bracket.

  1. Remove the bolt and separate the wire harness clamp bracket.



    A212297

  1. Disconnect the wire harness to remove the wire harness clamp bracket.



    A212295E04

  1. Using SST, remove the heated oxygen sensor.

    SST
    09224-00010