ENGINE COOLANT TEMPERATURE SENSOR > REMOVAL

for Preparation Click here



1. DISCHARGE FUEL SYSTEM PRESSURE
(Click here)


2. REMOVE FUEL INJECTOR ASSEMBLY
(Click here)


3. SEPARATE INVERTER RESERVE TANK ASSEMBLY


    A247950

  1. Remove the 2 bolts and separate the inverter reserve tank assembly.



4. REMOVE ENGINE COOLANT TEMPERATURE SENSOR

  1. Disconnect the engine coolant temperature sensor connector.



    A236649E01

  1. Using SST, remove the engine coolant temperature sensor and gasket.

    SST
    09205-76030