SERVICE PLUG GRIP > INSTALLATION

for Preparation Click here



1. INSTALL SERVICE PLUG GRIP

CAUTION:
Wear insulating gloves.

NOTICE:
Before connecting the service plug, check that no parts and tools remain and that the high voltage terminals and connectors are connected securely.



  1. Wear insulated gloves and install the service plug grip in the order shown in the illustration.


    A248487

  1. Rotate the handle of the service plug grip 90° toward the battery and slide it in the direction shown by the arrow until a click sound is heard.



2. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



3. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE

  1. Engage the 4 claws and 2 guides to install the rear floor board upper No. 3 plate.



4. INSTALL DECK FLOOR BOX RH

  1. Engage the 6 guides.

  1. Install the deck floor box RH with the clip.



5. INSTALL REAR NO. 3 FLOOR BOARD

  1. Install the rear No. 3 floor board.



6. INSTALL REAR DECK FLOOR BOX

  1. Install the rear deck floor box.



7. INSTALL REAR NO. 2 FLOOR BOARD

  1. Install the rear No. 2 floor board.